home *** CD-ROM | disk | FTP | other *** search
- Warren T. Katchmar wrote:
- >
- > I came across a Sony KV-1311CR which has a eight pin plug for RGB
- > digital hook up.
- > I am hoping that someone may know how the wiring should be to hook up
- > with a Amiga 500. Like pin 1 of the Amiga would go to Pin ??? on the Sony?
- > I did get some information on the wiring to hook up to the XBR 34 pin,
- > but I don't have any of those type of connectors or can the eight pin pulg be
- > use?
- > I would appericate any help with this as my old 2002 monitor and it has
- > seen better days.
-
- On a KV-1311CR, the 8 pin plug is indeed a RGB digital connector. What
- you want, however, is an RGB analog connector. This is the 34(?) pin
- header.
-
- In the heyday of the A1000, the KV1311CR was a very popular monitor. An
- Amiga cable for it was a pretty common part. You might check with
- Cables-to-Go or Redmond Cable (assuming they are still around) to see if
- they have any. Unfortunately, I don't have any phone numbers handy.
-
- Good luck!
-
- -----------------------------------------------------------------------
- Chris Scheers, Applied Synergy, Inc.
-
- 817-237-3360 (Voice) 817-237-3074 (Fax) Internet: asi@airmail.net
-